Airflow Sciences Corporation LogoAirflow Sciences Corporation
12190 Hubbard
Livonia, MI 48150-1737 USA
www.airflowsciences.com

Experts in CFD, physical flow modeling, and field testing since 1975. Our modeling provides cost-effective designs for ducts, pulverizers, windboxes, SCRs, ESPs, baghouses, scrubbers, and stacks. Custom field test equipment ensures accurate and efficient measurement of flow, temperature, chemical species, and particulate. The combination of modeling, testing, and engineering expertise makes ASC the one-stop shop for all your flow-related needs.

B&W LogoThe Babcock & Wilcox Power Generation Group, Inc.
20 S. Van Buren Avenue
Barberton, OH 44203 USA
www.babcock.com

The Babcock & Wilcox Company is a world leader for Environmental Control Products, including SCRs, FGDs (Wet & Dry), Particulate Removal (Baghouses, Wet ESP, Dry ESP) and Ultra Low NOx Burners. The B&W Construction Company has installed more SCRs in the U.S. than any other erector. For more information, call 1-800-BABCOCK.

BP LogoBabcock Power Environmental Inc.
5 Neponset Street
Worcester, MA 01615 USA
www.babcockpower.com

Babcock Power, Inc. through its subsidiaries, is a leading worldwide supplier of technology, equipment and services for the Power Generation industry. We offer a complete set of environmental solutions including SCRs, flue gas desulfurization scrubbers, mercury removal systems and low NOx burners; heat exchangers, steam surface condensers, feedwater heaters, MSRs, HRSGs; and steam generators with associated fuel preparation and firings systems.

CAE LogoClean Air Engineering
1601 Parkway View Drive
Pittsburgh, PA 15205 USA
www.cleanair.com

For over 30 years, Clean Air has been a global leader in stack testing, compliance planning, thermal and APC performance testing/optimization, sampling equipment & supplies, and instrument rental. Areas of expertise include flue gas analyses for Hg/SO2/SO3/NOx/NH3/HCl and particulates, Hg CEMS and ash resistivity analysis. Today, among other services, we are assisting our Utility customers in developing Appendix K mercury monitoring strategies, optimizing SCR systems, performing realtime particulate measurements for CAM planning, and more.

Buell LogoFisher-Klosterman, Inc. /Buell Division
200 N. 7th Street, Suite 2
Lebanon, PA 17046 USA
www.fkinc.com

Building on 50 years in air pollution control for industrial process industries, FKI has expanded the capabilities of its Buell Division to serve the particulate control needs of the power industry. Products and services include precipitator rebuilds, upgrades, conversions to pulse jet fabric filter, inspections, technical advisory services, and replacement parts for Buell and other OEM design precipitators.

GE LogoGE Energy
11206 NE 141 Terrace
Liberty, MO 64068 USA
www.gepower.com/airquality

GE ENERGY offers comprehensive air quality solutions. With the recent acquisition of BHA group, GE Energy's environmental services team now has an expanded capability to incorporate multiple technologies into end-to-end environamental solutions with the goal of reducing emissions, improving plant performance, and increasing a customer's overall profitability.

Haldor LogoHaldor Topsoe, Inc.
5510 Morris Hunt Drive
Fort Mill, SC 29708 USA
www.haldortopsoe.com

The Topsoe group is the market leader in the development and supply of heterogeneous catalyst and related technology. Topsoe's DNX catalyst and stationary SCR technology have proven over the last 20 years to provide the maximum NOx reductions with the lowest SO2 oxidation rate while achieving a high tolerance to common catalyst poisons such as Arsenic. Topsoe offers SCR catalyst for all applications ranging from large coal-fired boilers to diesel engines.

Johnson Matthey LogoJohnson Matthey
1121 Alderman Drive, Suite 204
Alpharetta, GA 30005 USA
www.matthey.com

Johnson Matthey designs and manufactures SCR catalyst used in power plants, power generation engines, gas turbines, industrial manufacturing facilities, marine propulsion engines, and automotive applications. The Selective Catalytic Reduction (SCR) catalyst manufactured by Johnson Matthey reduces the harmful emissions that help meet or exceed the EPA requirements. Johnson Matthey is the only manufacturer in the World to produce both plate and extruded homogeneous honeycomb catalysts for SCRs. Selective Catalytic Reduction (SCR) is the most effective system for reducing nitrogen oxides (NOx) emissions. Johnson Matthey has SCR catalyst installed in over 1,000 applications around the World. Johnson Matthey also supplies SCR systems for engine, gas turbine and industrial applications.

KC LogoKorea Cottrell Co., Ltd.
160-1 Tonggyo-Dong, Mapo-Gu
Seoul, 121-817 South Korea
www.koreacottrell.co.kr

Korea Cottrell's major air pollution control systems, such as electrostatic precipitator and FGD System, the core Air pollution control systems of thermal power plant burning fossil fuels, have well devoted for the clean environment with high reliability. Diversified dust collectors, De-NOx System, Flue Gas Cleaning System, Ash Handling System have been also widely accepted by wide range of industries to meet their technical and legal requirement. Market acceptance of our technologies and quality has been broadly fulfilled even in many overseas countries such as Taiwan, Japan, China, etc.

Marsulex Environmental Technologies LogoMarsulex Environmental Technologies
200 North 7th Street
Lebanon, PA 17046 USA
www.met-apc.com

Marsulex Environmental Technologies (MET) provides air quality control solutions and expertise that minimizes pollutants from emissions of electric utilities, petrochemical and general industrial customers. MET technologies include Dry CFB-FGD in addition to traditional and advanced Wet FGD. MET designs OEM and retrofit systems on new and existing plants and offers engineering studies and upgrades on existing FGD vessels.

Mississippi Lime Company LogoMississippi Lime Company
3870 S. Lindbergh Blvd, Suite 200
St. Louis, MO 63127 USA
www.mississippilime.com

Mississippi Lime is a leading producer of sorbents for Air Pollution Control systems. Our hydrated lime is a proven high-performance material for control of acid gases in Dry Sorbent Injection systems or Circulating Dry Scrubbers. Our quicklime is a high purity, high conversion feedstock for Spray Dry Absorber scrubbing systems. The Reagent Technology Services division of Mississippi Lime will work with you to supply high purity dry milled limestone for Wet FGD applications. A privately-owned company, Mississippi Lime has provided calcium products for over 100 years. Our production facilities are located in Ste. Genevieve MO, Vicksburg MS, Verona KY, Weirton WV, Chester SC, and Mobile AL, with additional terminals located throughout North America.

Nol-Tec LogoNol-Tec Systems, Inc.
425 Apollo Drive
Lino Lakes, MN 55014 USA
www.nol-tec.com

Nol-Tec is a service-oriented industrial automation and bulk material handling company specializing in pneumatic conveying and system integration. We provide high-quality custom-engineered systems to perfectly suit and fulfill our customers' diverse application needs - all at a competitive price. Partner with us for the best value in dense-phase and dilute-phase pneumatic conveying, railcar and truck unloading, weighing and batching, pneumatic blending, dust collection, bag handling, bulk storage, process control, and more.

RD LogoRedkoh Industries
300 Valley Rd
Hillsborough, NJ 08844 USA
www.redkoh.com

Redkoh Industries has been manufacturing precipitator controls for over 20 years. Our Transformer-Rectifier Control, Rapper/Vibrator Control, and Central Control Systems are recognized as being industry standard. Datatest Industries, American owned and operated since 1971, has maintained a state-of-the-art leadership position by designing and producing emissions monitoring equipment like Oxygen and CO Analyzers, Opacity Monitors and Triboelectric Detectors for Fabric Filter Broken Bag detection.

RE LogoReinhold Environmental, Ltd.
3850 Bordeaux Drive
Northbrook, IL 60062 USA
www.reinholdenvironmental.com

Reinhold Environmental Ltd. provides pollution control technical support in the form of training manuals, newsletters, marketing and technical studies, in-house seminars, NOx/APC conferences, WPCA seminars and maintaining PCUG networking center and web site.

Siemens LogoSiemens Environmental Systems & Services
36 Plymouth
Summit, NJ 07901 USA
www.siemens.com

As one of the world’s leading power engineering companies, Siemens delivers innovative and environmental-friendly solutions. Siemens develops and builds fossil fuel power plants and power-generating components as well as wind turbines. Instrumentation and control systems, fuel cell technology and extensive services round out their portfolio.

SEI LogoSouthern Environmental, Inc.
6690 West Nine Mile Road
Pensacola, FL 32526 USA
www.sei-group.com

Southern Environmental is part of the Southern Erectors Group of companies. We are dedicated to providing quality Air Pollution Control equipment and services.

ST LogoSteag Energy Services LLC
PO Box 1727 304 Linwood Road, Suite 102
Kings Mountain, NC 28086 USA
www.steag.us

In the Energy Business Area Steag specializes in the production of electricity from coal and renewable energies. As a full-service provider, we focus our engineering and consulting skills in the design, building and operation of power plants worldwide to provide complete end-to-end solutions. We are currently building the 'power plant of the future' in Duisburg-Walsum — more efficient, more economical and more environmentally friendly than conventional plants. We are also experts in biomass, biogas, geothermal energy and methane.

SE LogoStock Equipment
16490 Chillicothe Rd.
Chagrin Falls, OH 44023
www.stockequipment.com

Stock Equipment Company, part of Schenck Process Group, is a global supplier of material handling solutions as well as a provider of precipitator control solutions with its Forry AVC XM and ERC products.

URS LogoURS Corporation
9400 Amberglen Blvd.
Austin, TX 78729
www.urscorp.com

URS Corporation offers a range of professional planning, engineering and architectural design, environmental, construction, and program and construction management services. We also provide system integration, operations and maintenance, management and a wide range of specialized technical services. We are organized into three divisions: the URS Division, the EG&G Division, which includes the operations of Lear Siegler Services, and the Washington Division. With an established presence in major cities in the Americas, Europe, the Middle East, and Asia-Pacific, we serve the U.S. federal government, state and local government agencies and private-industry clients, including Fortune 500 companies worldwide.

WH LogoWahlco, Inc.
2722 South Fairview Street
Santa Ana, CA 92704 USA
www.wahlco.com

Wahlco serves the power industry through the manufacture and supply of SO3 and NH3 flue gas conditioning (FGC) systems, small NOx reduction (SCR and SNCR) systems, ammonia systems for SCR plus urea-to-ammonia "U2ATM" systems for DeNox and industrial applications.